Butyl Acetate, Ethyl Acetate, Nitrocellulose, Acetyl Tributyl Citrate, Adipic Acid / Neopentyl Glycol / Trimellitic Anhydride Copolymer, Isopropyl Alcohol, Adipic Acid/Fumaric Acid/Tricyclodecane Dimethanol Copolymer, Stearalkonium Hectorite, Sucrose Acetate Isobutyrate, Trimethyl Pentanyl Diisobutyrate, Stearalkonium Bentonite, Diacetone Alcohol, Citric Acid, Dimethicone, Kaolin, Polyethylene Terephthalate, Polyurethane-33, Polyester-3, Calcium Aluminum Borosilicate, Calcium Sodium Borosilicate, Alumina, Silica, Tin Oxide, Aluminum Hydroxide, Synthetic Fluorphlogopite, Polyoxymethylene Melamine, Ethylhexyl Hydroxystearate, Aluminum Calcium Sodium Silicate, Barium Sulfate, Hydrolyzed Keratin, Water (Aqua, Eau), Calcium Pantothenate, Mica
WARNING: Keep out of reach of children. External Use Only. Keep off skin. CAUTION: FLAMMABLE. Avoid heat or flame.
Apply Strong Adhesion Base coat to all 10 nails. Roll polish between your palms back and forth for 30 seconds to mix color. To prevent applying too thick, remove excess from the stem and brush, by wiping brush on the sides of the bottle neck. Hold brush at a slight angle above nail for 2 seconds, allowing nail polish to travel down to the tip of the brush. Touch the polish down in the center of the nail, slightly away from the cuticle. Gently push the brush up towards the cuticle, right below the base line and gently glide down nail towards the free edge in a single straight swipe motion. Lift the brush and repeat on each side of the nail plate, following the same single swipe motion to cover the length of the nail. Apply 1st coat of polish to all 10 nails. Apply second coat of polish in the same process